Treasure Garden 45 Inch Bar Height Pole for Model 8100 & 8120 Deluxe Auto-Tilt Umbrella (Bronze)
Convert your 9-Ft or 11-Ft Treasure Garden Deluxe Auto-Tilt umbrella from use with standard 30-inch high tables to 36-inch Counter Ht or 42-inch Bar-Ht tables with our 45″ Bar Ht bottom pole. (Note: Bottom pole included with umbrella is 32-inches) This 45 inch bar-ht pole has two holes to allow the locking pins on the housing of the umbrella to snap securely into place.
Product Features
45 Inch x 1.5-inch Diameter Bar-Height Bottom Pole (Bronze Finish: Models 810 & 812)
Converts TG model 810 & 812 Deluxe Auto Tilt Umbrella for use with 36″- 42″ Bar height tables
Pole will ONLY work with a TG 810 & 812 Model Deluxe Auto Tilt Umbrella
Will NOT work with Non-Treasure Garden umbrella brands.
This base is a bargain and a half This is one solid well built umbrella base. Twice the cost would still be a fair price. The pole is 1 5/8 I.D. 3/16 wall pipe, with machined threads. Not the flimsy thin wall tubing seen on some other brands. Very stout. The iron is a nice casting with no discernible cosmetic defects.As others have mentioned the pole is 2 pieces threaded together. The sizes are a skosh under 6″ and 10.5″ on my unit. The threads that connect the 2 pieces are different than the threads…
Good I bought two of these last summer for the umbrellas on my patio that shield my picnic tables from the sun. I bought them for three reasons: they were 50 pounds, which my umbrella maker recommended, you don’t have to put sand in a hollow plastic stand (that costs more than twice as much)–the stand actually weighs 50 pounds, and they were the least-expensive 50-pound umbrella stands I could find.They function exactly the same as umbrella stands costing a lot more. I did see some…
MYHH-LITES Flower Lights Solar Powered with Backup Battery Power and Remote Control, Wisteria String Lights, Umbrella Lights for Home, Garden, Backyard, Pergola, Bedroom, Wedding Decoration
12’x16′ Rectangle Sun Shade Sail Canopy in Stone Grey – Durable Outdoor Patio Cover Pergola Awning – Heavy Duty 8 inch Stainless Steel Hardware Kit (12’x16′ Rectangle, Stone Grey)
TACKLIFE Propane Fire Pit Table, 28 Inch 50,000 BTU, Outdoor Companion, Auto-Ignition Fire Table with Cover, CSA Certification, Strong Striped Steel Surface, as Table in Summer, Stove in Winter
Loading...
This base is a bargain and a half This is one solid well built umbrella base. Twice the cost would still be a fair price. The pole is 1 5/8 I.D. 3/16 wall pipe, with machined threads. Not the flimsy thin wall tubing seen on some other brands. Very stout. The iron is a nice casting with no discernible cosmetic defects.As others have mentioned the pole is 2 pieces threaded together. The sizes are a skosh under 6″ and 10.5″ on my unit. The threads that connect the 2 pieces are different than the threads…
Good I bought two of these last summer for the umbrellas on my patio that shield my picnic tables from the sun. I bought them for three reasons: they were 50 pounds, which my umbrella maker recommended, you don’t have to put sand in a hollow plastic stand (that costs more than twice as much)–the stand actually weighs 50 pounds, and they were the least-expensive 50-pound umbrella stands I could find.They function exactly the same as umbrella stands costing a lot more. I did see some…
Great umbrella stand, even in wind!